Why We Enjoy Double Glazing Door Lock Repairs (And You Should Also!)
Why We Enjoy Double Glazing Door Lock Repairs (And You Should Also!)
Blog Article
Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism started to fail? Maybe the window or door handles don't meet up properly or are difficult to use.
It is essential that your double-glazed doors function smoothly, or else you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at an affordable cost.
Snapped Key
When a key snaps off within a lock, it can be extremely difficult. It also poses an issue for security, since the door may not be locked and leave you open to intrusion. Fortunately, there are simple fixes you can try to resolve the problem and get your door working properly again.
Be calm. If you panic you could end up pushing the broken key piece further into the lock.
Next spray WD-40 or another penetrating oil into the lock to make the broken piece slip out more easily. You can also employ a screwdriver in order to break up any pieces stuck that might be blocking the way. If you happen to have a little bit of the key visible it, you can make use of a paperclip or other metal object that is thin to grab it and remove it. Both methods work, but be careful not to push the damaged key piece further into the keyway.
Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't happen to have any of these items then you can bend a hook using needle-nosed pliers. Additionally, a pair of tweezers can be used to grip and remove the remaining piece of the key that was broken.
If you're unable to pull the broken piece of key out, you can try using a lock de-icer. This is usually available at most hardware stores, and it is used to freeze any water or ice that could be in the lock.
If none of these strategies appear to be working you, it's time to call a locksmith. Fitlocks experts can quickly solve problems like broken handles and broken keys with uPVC locks and door mechanisms. They can also alter the double glazing door mechanisms so that they are simpler to operate. You can request an appointment online for a double-glazing repair or contact us to discuss your needs.
Broken Cylinder
A broken cylinder is an immediate security risk. A professional locksmith can easily repair the cylinder. To fix the cylinder, locksmiths must tap it. They can do this with a hammer or other tool, but the best way is to use a long match or piece of wire. Then, put the end of the match or wire in the keyway. The locksmith can hit the lock to break it open. This is more secure than using a hammer, which can damage the lock.
The most common cause of cracks in the cylinder head is overheating. This can happen when the block and cylinder head are made of various metals like cast-iron and aluminum. Different metals can heat up and cool off at different rates. This can cause localized hotspots to expand more quickly than the rest of the cylinder.
Another reason that could cause cracks in the cylinder is corrosion. If the head and block of a cylinder are not maintained properly they could rust or corrode and cause them to expand faster than expected. This could lead to cracks as time passes.
If your uPVC window or door lock is rigid and requires a lot of pressure to turn, it could be due to a variety of reasons. A defective locking mechanism, misalignment or an old handle are the most common causes of this issue.
Fortunately it is a simple and affordable fix for the majority of double double glazing company near me glazing owners. A professional locksmith will usually be able to solve this problem within an hour after arriving at your residence. Depending on the needs of your home, they can replace the locking mechanism, change the window handles, and change the gearboxes. A locksmith with experience can always advise you on the most cost-effective solution for your home. They can even suggest upgrades to high-security 3 Star Euro cylinders, TS007, that will provide an extra layer of security against burglars. This is a small price to pay for the peace of mind that comes with knowing your uPVC doors are secure.
Broken Handle
Window handle locks have intricate mechanisms that become less effective with age and use, so it's no surprise that they can break. If yours fails it's difficult to pinpoint the cause of the issue. Make sure that you repair it correctly.
The issue could be with the internal locking mechanism or the latch, repairing your broken handle will increase your uPVC double glazing door's security and allow you to stop draughts. When you aren't doing it right, replacing or repairing your handle can be expensive and could harm the door's frame as well as lock and frame, so it's worth spending some time to do it right.
Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside of the backplate. It is typically concealed by a screw check here cap for aesthetic purposes. It is important to not be able to replace any internal parts of the handle such as the plates and levers on either side. Keep them in the same order so that it is easier to replace them if needed.
Then, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw at the back of the handle which holds it to the internal spindle using a second screwdriver. Once this is loose, you should be capable of pulling the handle off and take out the broken spindle. Replace it with a new one, double glazed window suppliers near me making sure it is the same length as the previous one (you can typically find these online or in hardware stores) and then securely screw it into the right place. Don't over tighten the screw as this can cause damage to the handle and window frame.
Close the handle and try it. It should function smoothly, and you will be able to open your window once again.
While you're working on the handle, make sure to make sure your uPVC windows are shut correctly. If they don't close properly, you could experience damp or draughts in your home. read more It could also affect the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames so they shut correctly.
Broken Spindle
It is more likely for the spindle to break than the handle. This is especially common in uPVC tilt and turn windows. These windows require a handle that acts as an electronic locking mechanism within the window frame. The handle is attached to a centre rod that in turn activates mushroom-like locking cams, these lock into window frame keeps. If the double glazing units near me dead latch mechanism fails to open when the handle is turned, it is possible that the spindle is broken and this could be a very frustrating issue.
Fortunately, there are ways to fix this problem. A reputable locksmith will be able to quickly and effectively fix this issue. A professional locksmith will be able disassemble the window's handle using a tool to remove the wheel portion where the spindle is located. This can be done with no damage to the handle or window frame.
After removing the wheel the technician can inspect the spindle and identify the cause of the break. This involves disassembling the spindle and examining each component, noting any damage or excessive wear. The process is done in a clean environment by skilled technicians.
The next step is to clean the damaged spindle, this will remove any dirt or debris that might be hindering its normal operation. The spindle can be repaired or replaced. If it is replaced, the technician can take an identical dowel size to the original and drill mating holes into both pieces of the spindle. This ensures that the new spindle is an exact fit with the handle.
If the damaged spindle cannot be repaired it may require replacement completely. Home centers sell generic replacements. However, If the style of your window is unique then you will need to find a woodworker or cabinet maker who can make the exact model for you. Once the spindle has been installed, it is fixed to the handle. Place the screw holes on the handle with the screws that are already in the frame. Once the new handle is in place, you'll be able to operate your uPVC window.